Hey boys, AWD making a clunking noise on sharp turns.

Mindcore · 06-15-2007, 02:39 PM

What's going on? I used to have a 4 runner that did that, but hehehe it was "supposed to" this, not so much.

Who knows what?

Thanks

BrickTop · 06-15-2007, 07:12 PM

So it sounds like it's binding up?

Johnny Drama · 06-16-2007, 12:49 AM

Yo Mindcore, it's one of two things I think, depending on where the sound is coming from, could be the boot, or it's your diff. have someone do a turn and stand beside it, you'l be able to tell the differance

Lewis · 06-16-2007, 02:07 PM

exlax

blahblah · 06-17-2007, 03:23 PM

Sounds like your diff, if you catch it early enough, a fluid change should be enough to fix it.

Mindcore · 06-17-2007, 03:36 PM

Thanks guys, going in on Monday.. I don't have the patience to mess with this stuff

06-15-2007, 02:39 PM	#1 (permalink)
Mindcore Administrator Join Date: May 2007 Location: Look Out!!! Posts: 1,299	Hey boys, AWD making a clunking noise on sharp turns. What's going on? I used to have a 4 runner that did that, but hehehe it was "supposed to" this, not so much. Who knows what? Thanks __________________ core Mazda Forums .

06-15-2007, 07:12 PM	#2 (permalink)
BrickTop Member Join Date: May 2007 Posts: 79	So it sounds like it's binding up? __________________ Black Onyx Mazda6 sport

06-16-2007, 12:49 AM	#3 (permalink)
Johnny Drama Senior Member Join Date: May 2007 Posts: 555	Yo Mindcore, it's one of two things I think, depending on where the sound is coming from, could be the boot, or it's your diff. have someone do a turn and stand beside it, you'l be able to tell the differance __________________ MazdaSpeed6

06-17-2007, 03:23 PM	#5 (permalink)
blahblah Senior Member Join Date: May 2007 Location: Toronto, On. Posts: 144	Sounds like your diff, if you catch it early enough, a fluid change should be enough to fix it. __________________ Liquid Platinum MazdaSpeed 6 baby!

06-17-2007, 03:36 PM	#6 (permalink)
Mindcore Administrator Join Date: May 2007 Location: Look Out!!! Posts: 1,299	Thanks guys, going in on Monday.. I don't have the patience to mess with this stuff __________________ core Mazda Forums .

06-16-2007, 02:07 PM	#4 (permalink)
Lewis Member Join Date: May 2007 Posts: 94	exlax

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode