6TS2 front foglights

Vox · 02-25-2008, 05:35 PM

I have had a look at the headlamp units and there does not seem to be any wiring or bulb units. The stalk also does not have this function available. Any ideas on how I can fit front fogs as if it came as standard?

Mindcore · 03-02-2008, 05:24 PM

There are kits available with everything you need. Wire harness, switch, lamp sockets and housings.

You can also get the OEM stuff from your dealer and have them put them in if you're not mechanically inclined. But if you got a Saturday to kill, you should be ok by yourself.

02-25-2008, 05:35 PM	#1 (permalink)
Vox Junior Member Join Date: Feb 2008 Posts: 3	6TS2 front foglights I have had a look at the headlamp units and there does not seem to be any wiring or bulb units. The stalk also does not have this function available. Any ideas on how I can fit front fogs as if it came as standard?

03-02-2008, 05:24 PM	#2 (permalink)
Mindcore Administrator Join Date: May 2007 Location: Look Out!!! Posts: 1,299	There are kits available with everything you need. Wire harness, switch, lamp sockets and housings. You can also get the OEM stuff from your dealer and have them put them in if you're not mechanically inclined. But if you got a Saturday to kill, you should be ok by yourself. __________________ core Mazda Forums .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode