![]() |
![]() |
|
|||||||
|
Welcome to the core Mazda Forums forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Member
Join Date: Jun 2007
Location: Jersey
Posts: 79
|
Took me forever to find all this, so I made a text file, figured I would share.
Changing from Celsius to Farenheit -turn ignition to accessory mode -make sure temp is displayed -press POWER/VOLUME button to turn radio on -press and hold POWER/VOLUME button -press and hold MEDIA button for 10 sec -release MEDIA button -release POWER/VOLUME button You should hear a beep and the display should change. stereo beep sound ON/OFF - Turn off the stereo - Hold the seek down button down and the 5 button down - The stereo will beep to alert you that the beep notification has been disabled - Do 1-3 again to turn it back on On-Board Diagnosic Test Mode - Turn the ignition switch to the ACC or ON position. - While pressing the POWER button, simultaneously press the AM button and the CLOCK button for 2 s or more. (or POWER, CLOCK, and SAT) Turn SAT antenna ON/OFF - Turn radio on - Push and hold POWER and SAT buttons until it changes 6-disc changer, hold the LOAD button in until it beeps twice then you are able to load up the six cds without having to keep pressing the LOAD button for each cd. Same goes for the Eject button, hold it in for the beeps then all six discs will eject. Activate Trip Computer - for 2006 and newer models Insert key - DON'T TURN. Hold down the FM/AM button and the CD button. Turn key to ACC. Display reads 'Hello' immediately followed by 'DIS ON'. Turn on the car, press the 'SET' key, then press again to cycle through the functions |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|