Programming additional remotes.

Lenny · 06-17-2007, 10:46 AM

For those with more then a couple drivers.

Have the remotes that you are going to program with you when you are ready, as programming as all of them have to be reprogrammed into memory at the same time

1: Open driver side door and leave it open.

2: Lock and Unlock the drivers door using the power door lock switch on the door

3: Insert key into the ignition.

4: Turn key to ON position and return to Lock (off) position. Do this 3 times within 10 seconds. leave the key in the ignition in Lock (off) position.

5: Close and open the drivers door 3 times. Leave door open afterwards

6: The ECU should respond by locking and unlocking the doors once.

7: Press any button on the first remote twice. ECU responds by locking and unlocking the car doors.

8: For additional remotes, repeat Step 7 up tp 3 times for 3 remotes.

9: Remove the key from the ignition and the ECU will respond a final time with a series (about 3 or 4) of door locks and unlocks.

Sparta · 06-17-2007, 02:55 PM

Nice, thanks!

Blake · 09-21-2007, 05:49 PM

Lenny, I've been trying to do this and it doesn't seem to be working.

I bought one from ebay, and the codes on the back don't match, should that make a difference?

thx

Blake · 09-23-2007, 03:16 PM

I figured it out..it seems I can't read instructions properly

HotCarl · 09-24-2007, 10:48 PM

LOL which step did you miss?

( I screwed up #4

)

06-17-2007, 10:46 AM	#1 (permalink)
Lenny Senior Member Join Date: May 2007 Posts: 153	Programming additional remotes. For those with more then a couple drivers. Have the remotes that you are going to program with you when you are ready, as programming as all of them have to be reprogrammed into memory at the same time 1: Open driver side door and leave it open. 2: Lock and Unlock the drivers door using the power door lock switch on the door 3: Insert key into the ignition. 4: Turn key to ON position and return to Lock (off) position. Do this 3 times within 10 seconds. leave the key in the ignition in Lock (off) position. 5: Close and open the drivers door 3 times. Leave door open afterwards 6: The ECU should respond by locking and unlocking the doors once. 7: Press any button on the first remote twice. ECU responds by locking and unlocking the car doors. 8: For additional remotes, repeat Step 7 up tp 3 times for 3 remotes. 9: Remove the key from the ignition and the ECU will respond a final time with a series (about 3 or 4) of door locks and unlocks. __________________ Mazda 3 ownnzz

09-21-2007, 05:49 PM	#3 (permalink)
Blake Member Join Date: Jun 2007 Posts: 66	Lenny, I've been trying to do this and it doesn't seem to be working. I bought one from ebay, and the codes on the back don't match, should that make a difference? thx __________________ Mazda3 GT White with black tint

09-23-2007, 03:16 PM	#4 (permalink)
Blake Member Join Date: Jun 2007 Posts: 66	I figured it out..it seems I can't read instructions properly __________________ Mazda3 GT White with black tint

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.coremazda.com/forums/mazda3-forum/208-programming-additional-remotes.html
Posted By	For	Type	Date
Bongo Fury • View topic - How do you reprogram a remote control plipper?	This thread	Refback	06-18-2009 06:31 AM
Bongo Fury • View topic - How do you reprogram a remote control plipper?	This thread	Refback	11-18-2008 05:00 PM
Bongo Fury • View topic - How do you reprogram a remote control plipper?	This thread	Refback	11-15-2008 03:16 PM
Bongo Fury • View topic - How do you reprogram a remote control plipper?	This thread	Refback	11-15-2008 03:06 PM

06-17-2007, 02:55 PM	#2 (permalink)
Sparta Member Join Date: Jun 2007 Location: Jersey Posts: 79	Nice, thanks!

09-24-2007, 10:48 PM	#5 (permalink)
HotCarl Senior Member Join Date: May 2007 Posts: 195	LOL which step did you miss? ( I screwed up #4 )