![]() |
![]() |
|
|||||||
|
Welcome to the core Mazda Forums forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Junior Member
Join Date: May 2008
Location: east coast
Posts: 1
|
Used injector cleaner in last fillup, and now 97 B2300 will not start! Changed fuel filter, checked pump, changed fuel regulator, and checked cut off switch. Have fuel at correct pressure at fuel rail, and spark at plugs also. Any ideas what I'm missing and checked codes,but none come up? Appears to be no fuel getting into chambers, and find it hard to believe a 4 injectors clogged. When it first happened appearded loss of power on exceleration and then truck stalled at stop not to start again.
|
|
|
|
|
|
#2 (permalink) |
|
Junior Member
Join Date: Dec 2007
Posts: 19
|
youve checked the pump yeh,but does it make any noise when you turn the engine over? it could be in the fusebox,a blown fuse or a relay burnt out.hence the pump not working and no fuel getting through.it is strange for 4 injectors to get clogged up but anythings possible.you may have to drain the tank and check the contents out.good luck hope its something silly and cheap like an earth wire disconnected
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|