rocker cover and inlet manifold

robert.wright64@ntlworld. · 01-18-2008, 07:48 AM

I am considering romoving both of these to get them poweder coated. Is it a long job and is there anything I need to know?

Mindcore · 01-18-2008, 02:51 PM

Shouldn't take you more then an hour to remove them. The powder coat place should prep them for paint for you, so you shouldn't have to worry about grease, dirt, etc.

Just make sure that once you remove everything that you stuff some rags, and keep everything covered so nothing gets inside. ( be extra cautious about this.

01-18-2008, 07:48 AM	#1 (permalink)
robert.wright64@ntlworld. Junior Member Join Date: Nov 2007 Posts: 7	rocker cover and inlet manifold I am considering romoving both of these to get them poweder coated. Is it a long job and is there anything I need to know?

01-18-2008, 02:51 PM	#2 (permalink)
Mindcore Administrator Join Date: May 2007 Location: Look Out!!! Posts: 1,307	Shouldn't take you more then an hour to remove them. The powder coat place should prep them for paint for you, so you shouldn't have to worry about grease, dirt, etc. Just make sure that once you remove everything that you stuff some rags, and keep everything covered so nothing gets inside. ( be extra cautious about this. __________________ core Mazda Forums .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode